Zeiss VISULAS YAG III, User Manual

Page: 85 / 126

Operation of the device
000000-1272-175-GA-GB-060613
79
To operate the VISULAS YAG III in combination with the VISULAS Trion, the
two laser consoles must be connected by a special interface cable (Combi
cable).
As soon as this cable is connected, the buttons on the YAG III laser console
control panel will be deactivated and combination mode will be selected.
The instruments are operated using the VISULAS Trion control panel.
VISULAS Trion power-up mode
•
When the instrument is switched on using the key switch on the
VISULAS Trion laser console (see VISULAS Trion user manual) the start-up
screen is displayed on the control panel (Fig. 39).
•
The system automatically performs a self-test.
•
The user interface includes a progress bar, which shows the progress of
the system test.
•
When the system test has been successfully completed, the program
switches automatically to the main menu (see VISULAS Trion user
manual).
•
You can switch directly into Diagnosis mode during the system test.
•
To do so, touch the eco button.
Fig. 39 Power-up mode