manualshive.com logo in svg

Zeiss EVO, Instruction Manual, Page: 153 / 180

Share
Download
Zeiss EVO Instruction Manual Download Page 153

ZEISS

9 Technical Data and Conformity | 9.2 System Layout

9.2 System Layout

Fig. 46: System layout

9.3 Performance Data and Specifications | EVO 10

The Microscope System must only be operated in closed rooms. It is recommended to install the
Microscope System in a dark room where artificial illumination, sunlight or other light sources
cannot interfere with image acquisition. The Microscope System should not be installed near win-
dows with direct sunlight or radiators. Compliance with the installation requirements of the Mi-
croscope System and the availability of the requested supplies is the responsibility of the customer
and has to be provided at the time of installation. Due to continuous development, we reserve the
right to change specifications without notice.

The Microscope System must be plugged into a properly installed power socket with protective
earth contact using the supplied mains cable. The protective earth connection must not be im-
paired by the use of extension cables.

Info

Your ZEISS Sales & Service Partner will provide you with the detailed installation requirements.

Weight and Sizes

Main Components

Length
(mm)

Width (mm)

Height
(mm)

Weight (kg)

column

807

1031

1780

650

Overall

1930

1781

1780

720

Instruction Manual ZEISS EVO | en-US | Rev. 10 | 354706-0780-006

153

Summary of Contents for EVO





















































































































































































Reviews:

No comments