![background image](http://html2.mh-extra.com/html/zeiss/axioscope-5/axioscope-5_instruction-manual_3365198070.webp)
4 Installation | 4.7 Assembling the Stage
ZEISS
4.7.2 Assembling the Rotatable Mechanical Stage
1
4
2
3
Fig. 40: Installing the stable mechanical stage
1
Rotatable mechanical stage
2
Screw cap
3
Spring-loaded pin
4
Stage carrier
Procedure
1. Loosen the screw cap
3
of the spring-loaded pin
2
with approx. 3 turns.
2. Put the stage
1
with the dovetail ring notch onto the spring pin.
3. Press the stage forward against the spring-loaded pin and lower its back side into the stage
carrier
4
.
4. Tighten the screw cap.
Proceed in the reverse order for removal.
4.7.3 Assembling the Motorized Mechanical Stage on the Axioscope 7 Motorized Material
Stand
1
2
5
3
4
6
Fig. 41: Installing the motorized mechanical stage
1
Motorized mechanical stage
2
Threaded holes in the bottom of the
stage
3
Holes in the stage carrier
4
3 mm hex key
5
Stage carrier
6
Mounting screw (4x)
70
Instruction Manual ZEISS Axioscope 5, Axioscope 5/7 MAT | en-US | Rev. 13 | 430035-7344-001