10 Accessories and System Expansions | 10.7 Stages
ZEISS
10.7.5 Adjusting the Friction of the Coaxial Knurled Knobs on the Stage Drive
1
4
3
2
5
1
Coaxial knurled knob for the Y adjust-
ment
2
Upper hole nut
3
Lower hole nut
4
Coaxial knurled knob for the X adjust-
ment
5
Adjusting pin
X drive
Procedure
1. Push the coaxial knurled knob for the X adjustment
4
all the way to the bottom.
2. Remove the supplied adjusting pin
5
from the coaxial knurled knob for the Y adjust-
ment
1
.
3. Insert it into one of the holes of the lower hole nut
3
.
4. Hold the coaxial knurled knob for the X adjustment
4
and turn the hole nut with the
adjusting pin clockwise or counter-clockwise until the desired freedom of movement has
been achieved.
à
Small friction adjustment:
–
(clockwise)
Large friction adjustment:
+
(counter-clockwise)
It should not be shifted more than one revolution.
Y drive
Procedure
1. Push the coaxial knurled knob for the Y adjustment
1
all the way to the top.
2. Insert the supplied adjusting pin
5
into the hole of the upper hole nut
2
.
3. Hold the coaxial knurled knob for the Y adjustment
1
and turn the hole nut with the
adjusting pin clockwise or counter-clockwise until the desired freedom of movement has
been achieved.
à
Small friction adjustment:
–
(clockwise)
Large friction adjustment:
+
(counter-clockwise)
It should not be shifted more than one revolution.
4. Re-insert the adjusting pin into the coaxial knurled knob for the Y adjustment.
162
Instruction Manual ZEISS Axioscope 5, Axioscope 5/7 MAT | en-US | Rev. 13 | 430035-7344-001
