10 Accessories and System Expansions | 10.7 Stages
ZEISS
10.7 Stages
10.7.1 Mechanical Stage, 75x50/240° Rotatable
Purpose
Mechanical stages are used for fixing and positioning the sample for examination.
Position
The mechanical stages are mounted on the stage carrier of the stand.
Function
The sample is fixed on the stage by means of the sample holder. For this purpose, the sample
holder is equipped with a spring lever.
The sample is positioned in the beam path by means of the two coaxial drives in X and Y direc-
tion. The adjustment range can be read off the respective vernier scale.
The following features and controls are available:
§
240° rotatable with clamping function
§
coaxial drives in X and Y adjustment on the right, drive length 160 mm
§
dimensions 75x50mm
§
with hardcoat anodized surface
2
3
2
4
5
6
1
Fig. 71: Mechanical stage, 75x50/240° R
1
Knurled screw for clamping the stage
rotation
2
Threaded holes (2x) for fixing the sam-
ple holder to the stage
3
Vernier scale for display of the adjust-
ment range in X
4
Vernier scale for display of the adjust-
ment range in Y
5
Coaxial knurled knob for Y adjustment
6
Coaxial knurled knob for X adjustment
156
Instruction Manual ZEISS Axioscope 5, Axioscope 5/7 MAT | en-US | Rev. 13 | 430035-7344-001
