10 Accessories and System Expansions | 10.9 Loading the Condenser
ZEISS
10.9 Loading the Condenser
10.9.1 Assembling the Modulator Disk in the Condenser 0.9 BF Pol
3
4
5
1
2
1
Dial segment
2
Clamping screw
3
Condenser 0.9 BF Pol
4
Condenser opening
5
Modulator disk
Parts and Tools
Hex Key, 3.0 mm
Prerequisite
ü
The condenser
3
is removed from the condenser carrier.
Procedure
1. Loosen the clamping screw
2
of the condenser’s dial segment
1
and pull out the
dial segment.
2. Slide the modulator disk
5
with its two-pronged forked opening pointing forward into
the condenser opening
4
.
3. Make sure that the disk engages in the guide on both inner sides of the condenser.
à
The guide serves as a stop for the modulator disk. The pin of the disk’s clamping screw
must slide into the orientation groove of the condenser.
4. Tighten the disk’s clamping screw.
5. Replace the condenser in its carrier.
168
Instruction Manual ZEISS Axioscope 5, Axioscope 5/7 MAT | en-US | Rev. 13 | 430035-7344-001
