ZEISS
10 Accessories and System Expansions | 10.2 Light Sources
Procedure
1. At the illumination mount
3
on the rear
side of the stand, loosen the clamping screw
1
.
1
2
3
2. Insert the HBO light source
2
with the dovetail ring into the illumination mount.
3. Fasten the clamping screw.
4. Insert the multi-pin plug of the HBO 100 into
the device connector
4
on the PSU
5
.
5
4
6
7
8
5. Fasten the connector's coupling ring
8
.
6. Connect the mains socket
6
of the PSU to the mains. Use the power cable
7
.
Proceed in the reverse order for removal.
Instruction Manual ZEISS Axioscope 5, Axioscope 5/7 MAT | en-US | Rev. 13 | 430035-7344-001
151