ZEISS
4 Installation | 4.3 Asssembling the Binocular Tube
4.3 Asssembling the Binocular Tube
4
3
1
2
5
1
Dust cap of the stand
2
Clamping screw
3
Binocular tube
4
Dust cap of the binocular tube
5
Stand mount
Parts and Tools
Hex Key, 3.0 mm
Procedure
1. Loosen the clamping screw
2
.
2. Remove the dust cap
1
from the dovetail ring mount on the stand side.
3. Remove the dust cap
4
from the underside of the tube
3
.
4. Hold the tube at an angle, insert it with the dovetail ring into the stand mount
5
and
turn into a horizontal position.
5. Rotate the tube into the desired observation position.
6. Re-tighten the clamping screw with the hex key.
Proceed in the reverse order for removal.
Instruction Manual ZEISS Axioscope 5, Axioscope 5/7 MAT | en-US | Rev. 13 | 430035-7344-001
65