Zato CAYMAN FCE II Series, Safety, Operation And Maintenance Manual

Page: 81 / 96

81 / 96
CAYMAN
Version 01 - Revision 00
09/05/2017
∂ the second time (fig. 38 on page 81) , inverting the guide blade (going from cutting profile R1 to R2)�
fig. 38 Inverting the guide blades
Every 2 blade rotations, replace the blade fastening screws to ensure the threading holds.
∂ the third time (fig. 37 on page 80) , further rotating each blade in its housing by 180° (going from
cutting profile R2 to R3)�
To rotate the guide blades, perform the operations below in the following order:
1� remove the fastening screws on the guide blades;
2� insert the dowel pin in the blade face holes of the guide blades;
3� pinch the dowel pin to remove the centring pins and guide blades;
4� rotate/invert them as described above;
5� insert the centring plugs on the guide blades;
6� secure the guide blades, referring to
“7.2.2.11 how to make sure the blade screws and bolts are
tightened properly” on page 70 �