Zato CAYMAN FCE II Series, Safety, Operation And Maintenance Manual

Page: 46 / 96

46 / 96
CAYMAN
Version 01 - Revision 00
09/05/2017
Mechanically connecting the attachment to the machine (bucket position)
For the following description, refer to fig. 14 on page 47 �
To mechanically connect the attachment to the machine, carry out the operations below in the following
order:
1� position the attachment as indicated in (1) , referring to “5.1.3 handling and positioning instructions”
on page 39 :
−
perfectly horizontally;
−
on a solid surface;
−
with the shears facing the operating position;
2� remove the bucket from the machine, referring to the machine’s manual;
3� connect the linkage connection
(2) to the attachment by using the specific bolts;
4� retract the machine cylinder shaft (3) (bucket position) completely;
5� align the machine arm hole with the first hole (4) on the linkage connection;
6� connect the machine arm and the linkage by using the corresponding pin;
7� secure the pin, using the corresponding locking screw;
8� gently lift the machine arm, rotating the attachment until the second hole
(5) on the linkage connection
is in the range of the cylinder shaft;
9� extract the cylinder shaft until the second hole on the linkage connection aligns with the shaft hole (6) ;
10� insert the corresponding pin;
11� secure the pin by using the corresponding locking screw�