Zato CAYMAN FCE II Series, Safety, Operation And Maintenance Manual

Page: 83 / 96

83 / 96
CAYMAN
Version 01 - Revision 00
09/05/2017
7.2.3.9
adjusting the guide blades
To adjust the guide blades, it is mandatory to use at most 2 shims per blade�
Adjusting the guide blades requires:
- shims�
For the following description, refer to fig. 40 on page 83 �
To adjust the guide blades, for each guide blade (1) , perform the operations below in the following order:
1� remove the fastening screws on the guide blade;
2� insert the dowel pin in the blade face hole of the guide blades;
3� pinch the dowel pin to remove the centring pin;
4� put/remove the shim(s)
(2) into/from the guide blade housing;
5� put in the guide blade;
6� insert the centring pin;
7� secure the guide blade by referring to
“7.2.2.11 how to make sure the blade screws and bolts are
tightened properly” on page 70 �
8� check clearance between the upper jaws and the guide blades by referring to “7.2.2.5 Checks on the
shears” on page 64 �
1
2
fig. 40 Adjusting the guide blades