Zato CAYMAN FCE II Series, Safety, Operation And Maintenance Manual

Page: 39 / 96

39 / 96
CAYMAN
Version 01 - Revision 00
09/05/2017
5
INstruCtIoNs for phasEs prIor to
usE
5.1
traNsportatIoN, haNdlING aNd posItIoNING
5.1.1
Indications for transportation
The transport methods are agreed upon with the Customer when placing the order�
The Manufacturer disclaims any liability for damage or removal of parts that should occur when the attachment
is transported�
5.1.2
precautions to be taken upon reception of the attachment
Upon receiving the attachment, the Customer must make sure that:
∂ the packaging is intact;
∂ the supply corresponds with the order specifications;
∂ there is no obvious damage�
Should one of the above abnormalities be found, contact the Manufacturer�
5.1.3
handling and positioning instructions
All handling and positioning operations are the responsibility of n. 2 personnel in charge of
handling , who have been properly instructed regarding the use of lifting and handling equipment
and have the related license� During initial installation, handling and positioning operations are
carried out under the supervision of the Manufacturer’s Technicians�
rIsk of IMpaCt aNd CrushING
When lifting, all the surrounding area is to be considered a danger zone �
Ensure there are no exposed persons �
rIsk of oVErturNING
As long as the load is not completely lifted, check whether it is properly balanced�
Make sure the weight is well balanced and that the load is always kept in a perfectly upright
position.
The lifting operation must be carried out continuously without jerks or pauses and without
making the lifted component swing�
lift the load enough for it to move.
Instructions on handling and positioning the attachment must only be given by the handling
operator.
do not stand under suspended loads�
do not overturn the load�