Zato CAYMAN FCE II Series, Safety, Operation And Maintenance Manual

Page: 52 / 96

52 / 96
CAYMAN
Version 01 - Revision 00
09/05/2017
5.6
fIrst start-up
The first start-up operations must be carried out by an operator �
It is mandatory to use:
-
protective gloves ,
- protective shoes
to perform the following operations�
For the following description, refer to fig. 18 on page 53 �
Perform the following operations in order for the first start-up:
1� make sure the pins (1) are:
1�1� secured;
1�2� greased;
2� check that the blades are clean and clear of debris;
3� make sure the screws and bolts of the shears are tightened correctly by referring to
“7.2.2.11 how to
make sure the blade screws and bolts are tightened properly” on page 70 �
4� switch on the machine;
5� set the minimum machine motor speed;
6� partially run the cylinder 6 times
(2) about 100 mm in both directions;
7� check the machine oil level;
8� if necessary, top it up in order to reach the right oil level;
9� run the cylinder completely until maximum oil pressure is reached;
10� make sure the upper jaw
(3) opens/closes unhindered;
11� make sure there are no oil leaks along the entire hydraulic line�