Zato CAYMAN FCE II Series, Safety, Operation And Maintenance Manual

Page: 72 / 96

72 / 96
CAYMAN
Version 01 - Revision 00
09/05/2017
7.2.3.1
adjusting the clutch
For the following description, refer to fig. 27 on page 72 �
To adjust the clutch, perform the operations below on each clutch to be adjusted in the following order:
1� open/close the upper jaw until the spring pad (1) is approximately halfway of the upper jaw rubbing
surface;
2� remove the fastening screws of the flange (2) ;
3� remove the flange;
4� Turn the spindle
(3) clockwise to push the spring pad against the upper jaw, until the clearance between
the spring pad and the upper jaw is 0�2 mm;
5� insert the flange;
6� secure the flange by referring to
“7.2.2.11 how to make sure the blade screws and bolts are tightened
properly” on page 70 �
1
2
3
fig. 27 Adjusting the clutch