Zato CAYMAN FCE II Series, Safety, Operation And Maintenance Manual

Page: 13 / 96

13 / 96
CAYMAN
Version 01 - Revision 00
09/05/2017
RESIDUAL RISK
Danger that has not been possible to eliminate or reduce sufficiently through the design or protection
techniques�
IMPROPER USE
Use of the machine in a way other than that indicated in the user instructions, but which can derive from
easily foreseeable human behaviour� The Manual specifies certain foreseeable improper behaviour�
INTENDED USE
Using the machine in compliance with the information provided in the user instructions�
DANGER ZONE
Any area inside and/or near the attachment, where the presence of a person is a risk to his/her health and
safety�
CONTROL AREA
Area in which the Operator can control the attachment cyclical functions, using the specific control panels�
2.5.3.1
specific definitions and glossary
STOP
An operation done voluntarily by the Operator to interrupt a process that is underway�
ATTACHMENT
Mechanical element that works only paired with an excavator that supplies the driving force�
UPPER JAW
Mobile part that is driven by the cylinder and carries out the work of the attachment�
BYPASS
Bypassing an obstacle; in this Manual, it is intended as hydraulic oil seeping through the chamber gaskets�
CYLINDER
Hydraulic jack that exerts cutting/crushing force�
JAW
Stationary part used to grip the scrap to be reduced�
GUIDE BLADE
Hardened steel plate that establishes the width of the cutting inlet�
MAIN BLADE
Hardened, tempered steel plate equipped with cutting profiles, installed on the frame and upper jaw of the
shears� It can turn and is interchangeable with the others�