Zato CAYMAN FCE II Series, Safety, Operation And Maintenance Manual

Page: 82 / 96

82 / 96
CAYMAN
Version 01 - Revision 00
09/05/2017
7.2.3.8
replacing the guide blades
Replacing the guide blades requires:
- a dowel pin�
For the following description, refer to fig. 39 on page 82 �
To replace the guide blades, perform the operations below in the following order:
1� remove the fastening screws on the 2 guide blades (1) ;
2� insert the dowel pin in the blade face holes of the guide blades;
3� pinch the dowel pin to remove the centring pins and guide blades;
4� remove the guide blades;
5� clean the housing of the guide blades, referring to
“7.2.1 Cleaning” on page 60 ;
6� put in the new guide blades;
7� insert the centring plugs on the guide blades;
8� secure the guide blades by referring to
“7.2.2.11 how to make sure the blade screws and bolts are
tightened properly” on page 70 ;
9� check clearance between the upper jaws and the guide blades by referring to “7.2.2.5 Checks on the
shears” on page 64 �
1
fig. 39 Replacing the guide blades