YSI 5200A
137
YSI 5200A
136
1. Verify AC and DC power supplies are properly wired and powered - page
2. Enter Power Fail Alarm menu and submenus
Menus → System → Power Fail
3. Use
▲
and
▼
to scroll and highlight submenus.
4. Press
to select.
5. Enable and configure submenus.
6. Press
to save configuration and return to Run Screen.
Notes:
-
Press
to view AC power fail events.
-
icon at the Run Screen indicates that the 5200A DC power is ≥ Low Bat-
tery Trigger value with Low Battery Monitor is enabled.
-
icon at Run Screen indicates DC voltage ≤ the Low Battery Trigger when
Low Battery Monitor is enabled.
-
Low battery alarm is not reset when front panel softkey is pressed.
-
AC power fail does not generate a General Alarm.
Serial Number
Menus → System → Serial Number
The serial number is displayed at the serial number menu. The serial number is
required when contacting YSI customer service. The serial number is also necessary
to configure AquaManager. 5200A serial numbers begin with “53-”followed by seven
digits. Serial numbers are generated at the factory and cannot be changed by the user.
Configuring the 5200A
Service
Menus → System → Service
The Service menu includes submenus to configure and Reset Clean Probe Timer,
Reset Systems to factory defaults, and test Relay(s).
Reset Clean Probes
Menus → System → Service→ Reset Clean Probes
Enable the clean probe timer, configure the duration, and reset clean probe days
remaining from Reset Clean Probe menu. Selecting reset at this menu resets the
clean probe timer to the user configured value.
icon displays at Run Screen
when the clean probe timer expires.
Configuring the 5200A
