YSI 5200A
133
YSI 5200A
132
2. Use
▲
and
▼
to scroll and highlight submenus.
3. Press
to select.
4. Use keypad
to configure name.
5. Press
to save configuration and return to Run Screen.
Notes:
-
See information regarding instrument and relay name conventions across a
node network - page 133.
-
Names can contain up to 20 characters.
-
Use AquaManager to easily configure names using the PC keyboard. See
AquaManager help.
-
Names uploaded in the temperature system name field within the temperature
system tab are displayed at the run screen, configuration menus, and control
messages menus.
-
Instrument, Aux & Sensor Names are not cleared at Reset to factory menus.
-
Relays names are cleared at “reset relays”, “reset all systems” and “reset to fac-
tory/reset all” service menus.
-
5200 default system name is displayed at event, sensor, and calibration logs,
regardless if system name is user configured.
-
At alpha/numeric keypad enter charcter then press “Clear” at keypad and then
press
to clear user configured names.
-
Aux and E-Aux system names can also be configured at: Menus → System →
Configure Aux /Configure E-Aux→Aux 1-2/Eaux 1-8→Name
-
Because of font limitations, 1X2 and 2X3 display formats do not show all 20
characters of a 20 character name. Typically only 13 characters are displayed.
-
The instrument name is not shown at Run Screen. The instrument name is
shown at relay enable menus for a local instrument only.
-
Certain menus (i.e. configure aux) display up to 18 characters of the device
name. “...” is shown at the menu if the name exceeds 18 characters.
Configuring the 5200A
Below are screen shots of Run Screen and system low alarm menu displaying user
configured system name CATFISH NE.
Instrument and relay name conventions across a network.
See page “Local vs Remote Instruments” on page 8686 for definition of local
versus remote instruments. Configured instrument and relay names are displayed
differently when local versus remote instruments are selected at relay menus. An
instrument is selected at the sensor>control/alarm system>Instrument window.
The instrument window displays a generic list of instruments being Local Machine,
Master, Slaves 1-31. Only the Local Machine user configured name is displayed. A
relay is selected at the sensor or system>relay menu. The relay window displays a
generic list of relays 1-8 regardless if a remote 5200A or REM instrument is selected
which instruments have only 4 relays.
Generic Instrument window
Generic Relay window
Notes:
-
User configured instrument, system and relay names are displayed through-
out AquaManager systems management tab. User configured names are also
displayed at mapping.
-
Local instrument and relay names - Sensor instrument menu displays config-
ured (or default) local instrument name at instrument field when a prior relay
assignment has not been made.
Configuring the 5200A
