YSI 5200A
71
YSI 5200A
70
Figure 4.2
Run Screen Icons
Icons identify control, alarm, timer, power, service, and communication informa-
tion. Icons along the top of the Run Screen indicate 5200A systemwide conditions
- table 4.2. Icons displayed within a sensor window indicate condition(s) specific
to that system - table 4.3.
Notes:
-
Control icons display when control relay(s) is active.
-
General alarm icon, buzzer, 5200A emails, and enabled alarm relay(s) [sensor
and general alarm] remain active until one of the bottom four 5200A front
panel softkeys is pressed, regardless if the alarm condition no longer exists.
-
Relays, and corresponding icons, that de-energize for Svr Hold, calibra-
tion, and/or factory resets are restored after 30 seconds of completing Svr
hold, calibration, and/or factory resets. For exceptions, see menu specific
information in this chapter.
Configuring the 5200A
-
With alarms enabled, alarm icons appear at the systemwide location and
individual system location regardless if a relay is assigned to the sensor
alarm or general alarm system.
ICONS
(Systemwide)
Significance
Notes
RS232 communication
blinking icon indicates
“force serial port” is
enabled
TCP/IP communication
ethernet module installed
operating in acceptable DC power range
DC power is
≤
low battery trigger
5200A is password protected
log(s) have data
to view logs
one or more control systems is active
to view active systems
feed timer is active
one or more 10 event timer is active
clean probe timer has expired
General Alarm is active
Table 4.2
Configuring the 5200A
