YSI 5200A, User Manual

Page: 122 / 139

YSI 5200A
243
YSI 5200A
242

continued next page
Menu Maps
Sensor Setup
DO (Name) (Enabled)
DO (Enabled)
Control Mode

Set Point
PID
‐
PWM
PID
‐
4/20mA
Alarms (Disabled)
5400 only
Probe Type

Galvanic
5400 only
Membrane Type (Teflon 2.0mil)
Display Format (mg/l)

mg/l
Sat
mg/l and Sat
mg/l and Temp
Sat and Temp
mg/l, Sat and Temp
Salinity (0 ppt)
0‐80 ppt

Elevation (0 Feet)
Run Screen
→
Menus
→
Sensor Setup>
DO
(all control modes unless indicated at column 2)
Elevation (0 Feet)
0‐200X100ft

5400 only
Temp Source (User Defined) 25.0c
User Defined
OR


AUX 3
AUX 4
AUX 5
AUX 6
Temp Display Format (Celsius)

Fahrenheit
Celsius
Alarm Low (3.50 mg/l)
0.0
‐
60.0 mg/l*

Relay (Disabled)
Alarm Low (Disabled)
Instrument (Instrument)
Device Address

Local Machine
Master
Slave 1
‐
31
Relay (Unassigned) Relay (Unassigned)

Relay 1
‐
8
Set Point control only
Range Low 2 (4.00 mg/l)
3.5 ‐ 60.00 mg/l*

Set Point control only Relay (Disabled)
Range Low 2 (Disabled)
Instrument (Instrument)
Device Address

Local Machine
Master
Slave 1
‐
31
Relay (Unassigned)

Relay 1
‐
8
Set Point control only
Range Low (5.00 mg/l)
4.00 ‐ 60 mg/l*

Set Point control only Relay (Disabled)
Range Low (Disabled)
Instrument (Instrument)
Device Address

Local Machine
Master Master
Slave 1
‐
31
Relay (Unassigned)

Relay 1
‐
8
Set Point (8.00 mg/l)
5.0‐60.00 mg/l*

PID/PWM & PID
‐
4/20mA only
Control Up/Down (Rising)

Rising
Falling
PID/PWM & PID
‐
4/20mA only
PID Mode (mg/l)

Sat
mg/l
PID/PWM & PID
‐
4/20mA only
PID Interval (100.00 Seconds)

PID/PWM & PID
‐
4/20mA only
PID Reset Interval (20.00 Seconds)

PID/PWM & PID
‐
4/20mA only
PID Gain (2.00)

PID/PWM only
PID Relay (Disabled)
DO (Disabled)
Instrument (Instrument)
Device Address

Local Machine
Continued from prior page Setup>
DO
(all control modes unless indicated at column 2)

Local Machine
Master
Slave 1
‐
31
Relay (Unassigned)

Relay 1
‐
8
PID
‐
4/20mA only
PID Output 4/20ma (Disabled)
DO (disabled)
Instrument
Channel
Min
(0.0)
Max (100.0)
Output Scale (4.0mA)
Output Scale Max (20.00 mA)
all menus must be configured
using AquaManager
Set Point control only
Range High (8.50 mg/l)
8.0 to 60.0 mg/l*

Set Point control only
Relay (Disabled)
Range High (Disabled)
Instrument (Instrument)
Device Address

Local Machine
Master
Slave 1
‐
31
Relay (Unassigned) Relay (Unassigned)

Relay 1
‐
8
Set Point control only
Range High 2 (8.70 mg/l)
8.5 to 60.00 mg/l*

Set Point control only
Relay (Disabled)
Range High 2 (Disabled)
Instrument (Instrument)
Device Address

Local Machine
Master
Slave 1
‐
31
Relay (Unassigned)

Relay 1
‐
8
Alarm High (9.00 mg/l)
8.7 to 60.0 mg/l*

Relay (Disabled)
Alarm High (Disabled)
Instrument (Instrument)

‐

‐
Menu Maps