3
FORM 160.54-M1
ISSUE DATE: 10/25/2019
JOHNSON CONTROLS
JCI COMPANY CONFIDENTIAL
MANUAL DESCRIPTION
FORM NUMBER
Solid State Starter (Mod A) – Operation and Maintenance
160.46-OM3.1
Variable Speed Drive – Operation
160.00-O1
Variable Speed Drive – Service Instructions
160.00-M1
Solid State Starter (Mod B) – Operation and Maintenance
160.00-O2
Service - OptiSpeed Liquid Cooled Variable Speed Drive for Centrifugal Chillers
160.00-M4
Medium Voltage Solid State Starter – Service
160.00-M5
Medium Voltage Variable Speed Drive – Service
160.00-M6
Variable Speed Oil Pump Drive
160.52-M2
YK Style E MaxE Centrifugal Liquid Chillers Installation Instructions
160.54-N1
Operations Manual - OptiView Control Center, Model YK (through Style G), for EMS, SSS, and VSD
160.54-O1
Wiring Diagram – Unit (Style E) With Electromechanical Starter
160.54-PW1
Wiring Diagram – Unit (Style E) With Mod A Solid State Starter
160.54-PW2
Wiring Diagram – Unit (Style E) With Mod B Solid State Starter
160.54-PW2.1
Wiring Diagram – Unit (Style E) With Variable Speed Drive
160.54-PW3
Wiring Diagram – Unit (Style E) (P Compressors) With Electromechanical Starter
160.54-PW8
Wiring Diagram – Unit (Style E) (P Compressors) With Mod B Solid State Starter
160.54-PW9
Wiring Diagram – Unit (Style E) (P Compressors) Variable Speed Drive
160.54-PW10
Wiring Diagram – Field Control Modifications for YK Chiller (Style G)
160.75-PW4
Wiring Diagram – YK Chiller (Style G) OptiView Control Center with Remote Low or Medium Voltage EMS
160.75-PW5
Wiring Diagram – YK Chiller (Style G) OptiView Control Center with Unit Mounted Low or
Medium Voltage SSS, Unit Mounted Low Voltage with Modbus, or Remote Medium Voltage VSD
160.75-PW6
Renewal Parts - OptiView Control Center, Model YK (through Style G)
160.54-RP1
Service Information - OptiView Panel Software Enhancement - OptiSave VSD Software Feature
SI0068
CHANGEABILITY OF THIS DOCUMENT
In complying with Johnson Controls’ policy for con-
tinuous product improvement, the information con-
tained in this document is subject to change without
notice. Johnson Controls makes no commitment to
update or provide current information automatically
to the manual or product owner. Updated manuals, if
applicable, can be obtained by contacting the nearest
Johnson Controls Service office or accessing the John-
son Controls QuickLIT website at
.
It is the responsibility of rigging, lifting, and operating/
service personnel to verify the applicability of these
documents to the equipment. If there is any question
ASSOCIATED LITERATURE
regarding the applicability of these documents, rig-
ging, lifting, and operating/service personnel should
verify whether the equipment has been modified and
if current literature is available from the owner of the
equipment prior to performing any work on the chiller.
CHANGE BARS
Revisions made to this document are indicated with a
line along the left or right hand column in the area the
revision was made. These revisions are to technical in-
formation and any other changes in spelling, grammar
or formatting are not included.
