![background image](http://html2.mh-extra.com/html/yongkang/mk-21v/mk-21v_user-manual_4902905006.webp)
Note: The installation method of the impact
socket varies depending on the type of square drive
screw of the tool.
Install or remove the
socket / driver bit
①
Impact sleeve
②
Square transmission rod
③
Ring spring
Press the impact sleeve onto the square drive screw
until it locks in place. When disassembling the impact
sleeve, just pull it off.
①
Impact sleeve
②
O-ring
③
Pin
Move the O-ring out of the groove of the impact sleeve.
Remove the pin on the impact sleeve. Place the impact
sleeve on the square drive screw. Align the hole on the
impact sleeve with the hole on the square drive screw.
Pass the pin through the hole in the impact sleeve and
the square drive screw and then move the O-ring back
to its original position in the groove of the impact sleeve
to secure the pin.
When you need to remove the impact sleeve, please
follow the reverse steps of installation.
Impact sleeve without O-ring and pin
Impact sleeve with O-ring and pin
05
EN