To remove the battery pack, press the button on the front
of the battery pack while pulling the battery pack away
from the tool.
When installing the battery pack, align the tongue on the
battery pack with the groove on the cover, and then push
it into place. Insert it all the way into place until it locks
and clicks. If you can reach the red indicator in the picture,
it means it is not fully locked.
CAUTION: Be sure to fully insert the battery pack
until the red indicator is no longer visible. Otherwise,
it may accidentally become detached from the tool,
causing injury to yourself or others.
CAUTION: Do not force the battery pack to install. If
the battery pack is difficult to insert, it may be inserted
incorrectly.
Battery protection system
Repair
1. Let professional maintenance personnel repair the
power tool using the same spare parts. This will keep
the power tool being repaired safe.
2. Never repair a damaged battery pack. The battery
pack may only be repaired by the manufacturer or its
authorized repair service provider.
3. Please follow the instructions in this manual when
applying lubricating oil and replacing accessories.
3. When the battery pack is not in use, keep it away from
other metal objects, such as paper clips, coins, keys,
nails, screws or other small metal objects to prevent
one end of the battery pack from connecting to the other
end. A short circuit at the battery pack terminal may
cause burning or fire.
4. Do not use damaged or modified battery packs or tools.
A damaged or modified battery pack may produce
unpredictable results, resulting in fire, explosion, or injury.
5. Never disassemble or modify the battery pack.
Otherwise it may cause fire, overheating or explosion.
6. If the machine running time becomes too short, please
stop using it immediately. Failure to do so may result in
overheating, fire or even explosion.
7. If the electrolyte enters your eyes, please rinse them with
clean water and seek medical attention immediately.
Failure to do so may result in visual impairment.
8. Do not store or use tools and battery packs in places
where the temperature may reach or exceed 50°C (122°F).
9. Do not incinerate the battery pack even if the battery
pack is severely damaged or completely worn out.
Battery packs can explode in fire.
10. Do not shoot nails into the battery pack, or cut,
squeeze, throw, drop the battery pack, or hit the
battery pack with hard objects. Otherwise it may
cause fire, overheating or explosion.
11. When discarding the battery pack, remove it from the
tool and dispose of it in a safe area. Please follow
local regulations on how to dispose of used batteries.
12. Use batteries only with designated products. Installing
batteries into incompatible products can cause fire,
overheating, explosion, or electrolyte leakage.
13. If the tool is not used for a long time, the battery must
be removed from the tool and charged for at least 6
hours before use.
This tool is equipped with a battery protection system.
This system automatically cuts power to the motor to
extend tool and battery life. When working, if the tool or
battery is in the following conditions, the tool will
automatically stop running.
Overload warning function
The overload warning function works if the current rises
sharply due to operation (for example, applying excessive
pressure to the workpiece). The overload warning function
reduces the swing speed, thereby increasing the vibration
amplitude. In this case, once the application tool is
isolated from the workpiece, the swing speed returns to
normal. Continue operation with appropriate load.
Overload protection
The tool will automatically shut down when the tool
/ battery is operated in a manner that results in
abnormally high current flow. In this case, close the tool
and stop the application operations that are causing the
tool to be overloaded. Then start the tool and restart.
Overheating protection
The tool will automatically stop when the tool/battery
overheats. In this case, wait for the tool/battery to cool
down before turning the tool on. Over-discharge protection
When the battery power is insufficient, the tool
automatically stops operating. At this time, please
remove the battery from the tool and charge it.
*For safety reasons, it is not recommended for people
(including children) who are disabled, mentally retarded,
inexperienced or incapable of independent operation to
use this machine without supervision. Please supervise
children and prevent them from treating this machine as
a toy.
Installing or removing the
battery pack
CAUTION: Always turn off power to the tool before
installing or removing the battery pack.
CAUTION: Hold the tool and battery pack firmly when
installing or removing the battery pack. Otherwise they
may slip from your hands, causing damage to the tool
and battery pack, or even personal injury.
①
Red indicator
②
Button
③
Battery pack
02
EN
