YOKOGAWA WT5000 Features Manual Download Page 167

Page: 167 / 179

19-1

IM WT5000-01EN

19 Utility

Utility (Utility, UTILITY)

You can specify the following settings.

Instrument Information (System Overview)

You can view the system and setup data of this Instrument.

Click here.

System Configuration (System Configuration)

You can set the date and time, time synchronization, the menu and message languages, the LCD intensity,
whether the backlight is on or off, environmental settings, and the USB keyboard language.

Click here.

Remote Control (Remote Control)

You can select the method for connecting a PC to this Instrument to control it.

Click here.

Network (Network)

You can configure TCP/IP, FTP server, network drive, and SNTP settings.

Click here.

Self-test (Selftest)

You can test the keyboard and memory operations.

Click here.

Summary of Contents for WT5000




















































































































































































Search results

Summary of Contents for WT5000

Reviews:

Related manuals for WT5000

Brands by name

Popular brands

YOKOGAWA WT5000, Features Manual

Search results

Summary of Contents for WT5000

Reviews:

Related manuals for WT5000

Brands by name

Popular brands