manualshive.com logo in svg

YOKOGAWA WT5000, Features Manual

Share
Download
YOKOGAWA WT5000 Features Manual Download Page 162

18-1

IM WT5000-01EN

18  Ethernet Communication

Ethernet Communication (Network)

You can configure TCP/IP parameters and use the optional Ethernet interface to perform the following tasks.

TCP/IP

TCP/IP settings for connecting to an Ethernet network.
Set the IP address, subnet mask, and default gateway.

Click here.

FTP Server (FTP Server)

You can connect the instrument as an FTP server to a network.
You can connect to this Instrument from a PC on the same network and retrieve setup data, numeric data, 
waveform display data, and screen image data.

Click here.

Network Drive (Net Drive)

You can save the setup data of this Instrument, numeric data, waveform display data, and screen image data to 
a network drive. You can also load the setup data from a network drive into this Instrument.

Click here.

SNTP

The instrument clock can be set using SNTP. When this Instrument is turned on, the date and time are set 
automatically.

Click here.

  To connect a PC to this Instrument, use a hub or router, and connect to a network. Do not connect a PC 

directly to the instrument.

Summary of Contents for WT5000




















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands