YOKOGAWA VZ20X, User Manual

Page: 34 / 158

4-5
IM 77V01B01-01EN 5th Edition: 2023.03.07-00
Push in the electric wire release button vertically using a flat-bladed screwdriver. Note
that applying force in a different direction may result in damage to the product or an
injury.
1
Turn the power supply off.
2
Wire the power wire and signal wire to the terminals on the VZ20X.
Wiring of push-in terminals
Removal
Press the white release button with a flat-bladed
screwdriver (tip width 2.0 mm to 2.5 mm) and draw
out the cable.
When connecting a ferrule terminal and
solid-core wire, push the ferrule terminal or the
solid-core wire crimped onto the cable into the
push-in terminal.
With thin solid-core wire, wiring sometimes
bends and cannot be connected simply by
pushing it in.
In this case, push the lead into the push-in
terminal by pressing in the white release button
using a flat-bladed screwdriver (tip width 2.0 to
2.5 mm) in the same way as when connecting
twisted wire.
When connecting twisted wire
Push the lead into the push-in terminal by
pressing in the white release button using a
flat-bladed screwdriver (tip width 2.0 to 2.5
mm). After pushing in the lead, release the
flat-bladed screwdriver from the release button.
Check that the cable cannot be drawn out.
Wiring
Electric wire
Connection
port
Flat-bladed screwdriver
Electric wire
Release button
Flat-bladed screwdriver
Electric wire
Release button