YOKOGAWA VZ20X, User Manual

Page: 22 / 158

2-1
IM 77V01B01-01EN 5th Edition: 2023.03.07-00
2. Operating Procedure
Set up by the following procedure.
●
PC / PLC, etc
●
GA10
Wire the equipment Step 1
Wire the equipment in keeping with the operating
environment.
Refer to User's Manual Chapter 4.
Refer to User's Manual Chapter 5.
Refer to User's Manual 7.2.5 and 7.2.6
Make the various settings in VZ Configurator.
When everything is ready, start data acquisition.
Set up the device that will acquire the data.
Acquire the data using Modbus/TCP.
Set up the data acquisition device
Set up the VZ20X in VZ
Configurator
Programming
Acquire data
Step 2
Step 3
Step 4
Wire the equipment
Wire the equipment in keeping with the operating
environment.
Refer to User's Manual Chapter 4.
Refer to User's Manual Chapter 5.
Refer to GA10 User's Manual (IM 04L65B01-01EN)
Make the various settings in VZ Configurator.
When everything is ready, start data acquisition.
Register VZ20X in GA10.
Registration of VZ20X in GA10
Set up the VZ20X in VZ
Configurator.
Acquire data
Step 1
Step 2
Step 3
Step 4