manualshive.com logo in svg

YOKOGAWA TM20, User Manual, Page: 97 / 111

Share
Download
YOKOGAWA TM20 User Manual Download Page 97

88

88

IM 54011-E

1

Receiving the Data on the Personal Computer

This section explains the procedure used to receive data, such as measurement
data with the main unit, on the personal computer.  The following data items can
be received:

●

Measured data associated with tags and logs

●

Tag and log setup data

●

Operator name data

Received tag and log data can be transferred to Microsoft Excel95 or Microsoft
Excel97 (hereinafter referred to as Excel) when the data is received on the per-
sonal computer.

■

Preparation before reception

1.

Make sure that the power to the personal computer and main unit is turned off.

2.

Connect the personal computer and main unit with the supplied cable.

See Also

For how to connect the personal computer and main unit, refer to “

■ 

Connecting the personal com-

puter and the main unit” in Section 4.1 of the “Preparing for Measurement” part.

3.

Turn on the power to the main unit.

See Also

For how to turn on the main unit, refer to “

■ 

Turn the power supply to ON” in Chapter 4 of the “Before

Use” part.

4.

Turn on the power to the main unit.

Now it is ready for reception.

-End of procedure-

1  Receiving the Data on the Personal Computer

Summary of Contents for TM20
















































































































Reviews:

No comments