manualshive.com logo in svg

YOKOGAWA TM20, User Manual, Page: 102 / 111

Share
Download
YOKOGAWA TM20 User Manual Download Page 102

93

IM 54011-E

93

93

W

orking with

Measured Data

2.2 Outputting the measured

data to the printer

[TIP]

Connect the main unit and the printer before
turning on the power to the printer.  If this is
not done, the measured data cannot be output-
ted to the printer.

Home screen

18:54:27

222

222

25.9

°

C

1.

Press the [FUNC], [5] and [2] keys, in
order.

The “1File” screen appears on the LCD.

F52

1 F i l e

2.

Press the [SET] key.

Burger

1 1

3.

Press the [

▼

] key repeatedly until the

tag or log to be outputted is displayed.

The tag name or log name and the number of pieces
of measured data recorded in the tag or log is dis-
played.

Convey

1 1

[TIP]

If the [

▼

] key is pressed repeatedly, “NewTag”

appears.  Existing tags is displayed before
“NewTag” appears.  Existing logs are displayed
after “NewTag” appears.

4.

Press the [SET] key.

The confirmation screen appears.

Print?

Ye s 1 / N o 0

5.

Press the [1] key.

Printout is performed.

[TIP]

To output all the data recorded on the main unit,
press the [FUNC], [5], and [3] keys, in this or-
der, and then press the [SET] and [1] keys.

Press the [ESC] key repeatedly to return to the Home
screen.

- End of procedure

2  Outputting Directly from the Main Unit to the Printer

Summary of Contents for TM20
















































































































Reviews:

No comments