YOKOGAWA TM20 User Manual Download Page 37 | Manualshive

Page: 37 / 111

YOKOGAWA TM20 User Manual Download Page 37

28

28

3 Setting Up with the Personal Computer

IM 54011-E

•

ON/OFF of the lower-limit alarm and lower-limit temperature

Make the following settings to sound an alarm if the temperature falls below a preset limit.
The lower-limit temperature cannot be set if the alarm function for the lower limit is set to OFF.

Temperature

Setting the lower-limit alarm to ON and the lower-limit temperature to 50

°

C

50

°

C

: Range in which the alarm sounds

•

Inverse alarm function ON/OFF

The settings of the alarm function can be inverted.
Specifically, if this inverse alarm functions is set to ON, an alarm will sound if the temperature falls
below the upper limit or if the temperature rises above the lower limit.

Temperature

Upper-limit alarm 70

°

C

Lower-limit alarm 50

°

C

70

°

C

50

°

C

Upper-limit alarm 70

°

C

Lower-limit alarm 50

°

C

Temperature

70

°

C

50

°

C

: Range in which the alarm sounds

If “OFF”

If “ON”

[TIP]

The alarm can also be set to turn off if the temperature exceeds the upper limit, or it can be set to turn
on if the temperature falls between the upper and lower limits.

●

Operator name

Set the name of the operator.

See Also

For how to set the operator name, refer to “

■

Registering the measurement operator name”.

«
...
35
36
37
38
39
...
»

Summary of Contents for TM20
















































































































Reviews:

No comments