manualshive.com logo in svg

YOKOGAWA TM20, User Manual, Page: 107 / 111

Share
Download
YOKOGAWA TM20 User Manual Download Page 107

98

98

IM 54011-E

Simplified input corrections

A bias within a range between –20.0

°

C and 20.0

°

C can be set for the measured values of a thermocouple input.

The bias is added to (or subtracted from) all values measured by each specified channel.  When the correction is
effective, the unit is underlined in the display, such as “

°

C.”

Scaling of voltage inputs

Using the PC application (Thermo-Collector) that comes with the TM20, an input value X can be converted to a
display value Y according to the equation [Y = aX + b] and a 2-digit unit of alphabetical letters, percent signs, and
spaces can be set for each channel for which a voltage input range is selected.

●

External dimensions

Approx. 151 (H) x 56 (W) x 33 (D) mm (excluding the projecting sections)

●

We i g h t

Approx. 180 g (including 2 ANSI AA (IEC LR6) alkaline batteries as standard)

●

Approvable standards

EMC standards

EMI (interference signal)

EN55011; 1998, EN61326-1; 1998+A1 (Class B, Group 1)

EMS (immunity)

EN50082-1; 1997, EN61326-1; 1998+A1

Effect of EMS immunity

Accuracy: The following value should be added to the accuracy under standard use.
However, the length of connection cables containing a probe is under 3m.
Type K, J, E, and T range

±

5% of span

1V, and 100mV range

±

5% of range (for electromagnetic field with a radio-frequency of 3V/m, under

standard use)

●

Battery (reccommeded)

ANSI AA (IEC LR6) alkaline battery, 1.5V x 2

●

Operation and storage enviroment

Operation temperature/humidity range: 0 to 50

⬚

C (32 to 122

⬚

F), 20 to 80%RH (no condensation)

Storage temperature/humidity range: -10 to 60

⬚

C (14 to 140

⬚

F), 5 to 95%RH (no condensation)

The operation and storage environment must be free from organic solvent or corrosive gases.

●

Accessories

Instruction manual (including the descriptions of the application software)

1 copy

ANSI AA (IEC LR6) alkaline battery

2 units

Application software (on 1.44 MByte floppy diskette)

3 diskettes

Dust-proof seal (for sealing the screw holes on the back face of the main unit)

2 pieces

Waterproof case

1 piece

●

Probe (option) specifications

Model Code

Prove type

Measuring ranges

Accuracy

900 20

rounded end

-50 to 600

°

C [-58 to 1112

°

F]

0.4% or 

±

1.5

°

C(

±

2.7

°

F)

900 21

rounded end

-50 to 600

°

C [-58 to 1112

°

F]

0.4% or 

±

1.5

°

C(

±

2.7

°

F)

900 22

rounded end

-50 to 600

°

C [-58 to 1112

°

F]

0.4% or 

±

1.5

°

C(

±

2.7

°

F)

900 23

needle

-50 to 500

°

C [-58 to 932

°

F]

0.4% or 

±

1.5

°

C(

±

2.7

°

F)

900 24

needle

-50 to 500

°

C [-58 to 932

°

F]

0.4% or 

±

1.5

°

C(

±

2.7

°

F)

900 30

Surface straight

-20 to 250

°

C [-4 to 482

°

F]

0.75% or 

±

2.5

°

C(

±

4.5

°

F)

900 31

Surface angled

-20 to 250

°

C [-4 to 482

°

F]

0.75% or 

±

2.5

°

C(

±

4.5

°

F)

900 32

Surface straight

-20 to 500

°

C [-4 to 932

°

F]

0.75% or 

±

2.5

°

C(

±

4.5

°

F)

900 33

Surface angled

-20 to 500

°

C [-4 to 932

°

F]

0.75% or 

±

2.5

°

C(

±

4.5

°

F)

2459 07

Beads TC

-40 to 260

°

C [-40 to 500

°

F]

0.75% or 

±

2.5

°

C(

±

4.5

°

F)

900 03

Non-contact thermo probe

-20 to 400

°

C [-4 to 752

°

F]

±

(1% of r1

°

C) or 

±

3

°

C

Summary of Contents for TM20
















































































































Reviews:

No comments