manualshive.com logo in svg

YOKOGAWA TM20, User Manual, Page: 83 / 111

Share
Download
YOKOGAWA TM20 User Manual Download Page 83

74

74

IM 54011-E

■

Measuring with the non-contact thermo probe

Warning

Do not look into the laser beam which is emitted from the non-contact thermo probe.
The laser can cause eye damage and other injuries.

Note

Before using the non-contact thermo probe, read the instruction manual supplied with
the non-contact thermo probe.

1.

Connect the “D” channel jack on the main unit and the non-contact thermo probe.

[TIP]

• Insert the connector plug so that the “

←

” mark on the cable grip faces upward.

• The “D” channel jack is located on the left side of the main unit bottom face.

 

Measuring in the collector mode

2.

Set the main unit to the collector mode, then select a tag and operator name for the
measurement.

See Also

For the collector mode, refer to Chapter 2, “Measuring Temperatures with the Collector Function”.

3.

Turn the non-contact thermo probe towards the measuring object, and press the [MEA-
SURE] key.

A laser beam is emitted from the non-contact thermo probe and onto the measuring object.

[TIP]

If the laser beam is not being emitted, press the [POINTER] key on the non-contact thermo probe.

4.

While holding down the [MEASURE] key, press the [MEMORY] key on the main unit.

The temperature being displayed on the non-contact thermo probe screen will also be displayed on the screen of the
main unit.  When the buzzer sounds on the main unit, the measured value and current time is stored in memory.

[TIP]

If the measurement continues with the selected tag, perform step 3 again after step 4 has been per-
formed.

-End of procedure-

5 Measuring Temperatures with the Radiation Temperature Probe

Summary of Contents for TM20
















































































































Reviews:

No comments