YOKOGAWA TM20 User Manual Download Page 12

Page: 12 / 111

IM 54011-E

Bef

ore Use

RS232C

NO.

Made in

Japan

Yokogawa M&C Corporation

WARNING

Measuring
temperature ranges

ESC

FUNC

MEMORY

CLEAR

SET

LOGGING

POWER

WXYZ

xymbol

YUV

PQRS

GHI

ABC

DEF

JKL

MNO

[4]

Front face

Top face

Bottom face

Back face

[16]

[8]

[9]
[10]

[13]

[11]
[12]

[14]

[15]

[3]

[1]

[2]

[7]

[5]

[6]

Names and Functions of Each Part

2 Names and Functions of Each Part

[1] External probe jacks (channels A and B)

Used to plug in the cables of thermocouple type K, J,
E, or T probes or voltage measurement (

100 mV or

1 mV range) sensors. (A voltage measurement probe

has a U-shaped omega connector.)

[2] Non-contact thermo probe jack (chan-

nel D)

Used to connect a non-contact thermo probe.

[3] RS-232C communication terminal

Used to output data from this instrument to a per-
sonal computer or printer.

[4] Display (LCD)

Displays Thermo-Collector conditions, various setup

information, measurement temperature, etc.

[5] [CH] key

Used to switch over the input channel between chan-
nels A, B, and D. Channel D is for a non-contact
thermo probe.

[6] [ESC] key

Used to cancel the previous operation and return to
the previous screen.

[7] [Memory] key

Used to commence a temperature measurement with
either the collector function or the logging function.

[8] [

▼

] [

▲

] key

Used to select an appropriate tag, log, or function.

[9] [LOGGING] key

Used to switch between the collector and logging
functions. Also used to modify alphanumeric char-
acters from uppercase to lowercase.

[10] [POWER] key

Used to turn the power supply on and off.

[11] [Set] key

Used to make the setup contents valid for operation.

[12] [Func] key

Used to set up the selected function.
Also used to delete the measured data.

[13] [1],...,[9], and [0] keys

Used to enter alphabets and numbers.
The [0] key is also used for switching the unit of tem-
perature display. If, for example, this [0] key is
pressed in the Home screen, the unit is switched to
“

⬚

F”. Another pressing of the same key will restore

the unit to “

⬚

C”.

[14] [<] and [>] keys

Used to retrieve the logged tag data or log data, or to
select the character input position.

[15] Battery compartment

Accommodates two ANSI AA (IEC LR6) alkaline
batteries.

[16] Name plate

Summary of Contents for TM20
















































































































Search results

Summary of Contents for TM20

Reviews:

YOKOGAWA TM20, User Manual, Page: 12 / 111

Search results

Summary of Contents for TM20

Reviews: