46
IM 54011-E
46
46
4 Setting Up with the Main Unit
4
Setting Up with the Main Unit
4.1
Setups required to use col-
lector function (setting tag
names, alarms, name of
person, and comment, and
selecting input channel(s))
Before using the collector function, the fol-
lowing tag setups must be made.
■
Setup contents
See Also
For information about each setup item, refer to
Section 3.4, “Setups required to use collector
function (settintg tag names, alarms, name of
person, and comment, and selecting input
channel(s))”.
•
Tag name
•
Input channel
•
Alarm
•
Operator name
•
Comment
■
Creating a new tag
Create new tags for recording the measure-
ment data.
Home screen
18:54:27
222
222
25.9
°
C
1.
Press the [FUNC], [1], and [3] keys, in
order.
The “Tag Ins” screen appears.
F13
Ta g I n s
2.
Press the [SET] key.
A screen for selecting the tag name appears.
Burger
0
[TIP]
If no tag has been created in the main unit,
[NewTag] is displayed on the screen.
3.
Press the [
▼
] key repeatedly until
[NewTag] is displayed on the screen.
[NewTag]
0
4.
Use the [CH] key to select the input
channel.
The input channel of the [INPUT] gage changes.
[NewTag]
0
[TIP]
Select “A” and “B” at the two-channel simul-
taneous measurement.
5.
Press the [SET] key.
A screen for entering a new tag name appears.
[ N e w Ta g ]