manualshive.com logo in svg

YOKOGAWA TM20, User Manual, Page: 51 / 111

Share
Download
YOKOGAWA TM20 User Manual Download Page 51

42

42

3  Setting Up with the Personal Computer

IM 54011-E

3.6

Downloading the setup data to the main unit

If the setup operation for the personal computer has been completed, download the setup
data of the tag, log, and operator name to the main unit.
Tag setup data and log setup data is downloaded in a batch and as one file.  The operator data
is downloaded separately.

NOTE

If the setup data is downloaded to the main unit, the setup data and measurement data
that existed in the main unit before download is deleted.

■

Preparation for downloading

1.

Confirm that the power to the personal computer and main unit is OFF.

2.

Connect the personal computer and main unit with the supplied cable.

See Also

For how to connect the personal computer and main unit, refer to “

■ 

Connecting the personal com-

puter and main unit” in Section 3.1.

3.

Turn on the power of the main unit.

See Also

For how to turn on the power to the main unit, refer to Chapter 4, “Turn ON/OFF of the Power Supply”
in the “Before Use” part.

4.

Turn on the power of the personal computer.

Now it is ready for downloading.

-End of procedure-

Summary of Contents for TM20
















































































































Reviews:

No comments