manualshive.com logo in svg

YOKOGAWA TM20, User Manual, Page: 84 / 111

Share
Download
YOKOGAWA TM20 User Manual Download Page 84

75

75

IM 54011-E

Measuring

T

emperatures

 

Measuring in the logging mode

2.

Set the main unit to the logging mode, then select a log for the measurement.

See Also

For the logging mode, refer to Chapter 3, “Measuring Temperatures with the Logging  Function”.

3.

While holding down the [MEASURE] key, turn the non-contact thermo probe towards
the measuring object.

A laser beam is emitted from the non-contact thermo probe and onto the measuring object.

[TIP]

If the laser beam is not being emitted, press the [POINTER] key of the non-contact thermo probe.

4.

Press the [MEMORY] key twice.

Measurement begins.

[TIP]

To stop the measurement, hold down the [ESC] key for about two seconds.

After the specified measurement period elapses, the previous screen displaying the log name is restored.

5.

Hold down the [MEASURE] key on the non-contact thermo probe until the measure-
ment has been completed.

-End of procedure-

5 Measuring Temperatures with the Radiation Temperature Probe

Summary of Contents for TM20
















































































































Reviews:

No comments