manualshive.com logo in svg

YOKOGAWA TM20, User Manual, Page: 70 / 111

Share
Download
YOKOGAWA TM20 User Manual Download Page 70

61

IM 54011-E

5  Confirm, Modify, Clear, or Delete the Data with the Main Unit

61

61

Preparing f

o

r

Measurement

5.7

Clearing the measurement
data associated with the log

This section explains the procedure for clear-
ing the measurement data obtained with the
logging function.  However, the setup data
(log name, measurement interval, and mea-
surement period) will not be cleared.

Home screen

18:54:27

222

222

25.9

°

C

1.

Press the [FUNC], [4], and [2] keys, in
order.

The “1LogFile” screen appears on the LCD.

F42

1 L o g F i l e

2.

Press the [SET] key.

Convey

1 2

3.

Press the [

▼

] key repeatedly until a log

with measurement data that is to be
cleared is displayed on the screen.

Accept

3

4.

Press the [SET] key.

The confirmation dialog box appears.

LogClr?

Ye s 1 / N o 0

5.

Press the [1] key.

Accept

0

All the measurement data of the selected log is
cleared.
Press the [ESC] key repeatedly to return to the Home
screen.

-End of procedure-

5.8

Deleting the log

This section explains the procedure used to
delete the log from the main unit.

Note

Before deleting the log, save the mea-
surement data associated with the log
to a personal computer, etc.
If the log has already been deleted, all
the measurement data associated with
the log is completely lost.

See Also

For how to save the measurement data, refer to
Chapter 1, “Receiving the Data on the Personal
Computer” in the “Working with Measurement
Data” part.

Home screen

18:54:27

222

222

25.9

°

C

Summary of Contents for TM20
















































































































Reviews:

No comments