manualshive.com logo in svg

YOKOGAWA TM20, User Manual, Page: 66 / 111

Share
Download
YOKOGAWA TM20 User Manual Download Page 66

57

IM 54011-E

5  Confirm, Modify, Clear, or Delete the Data with the Main Unit

57

57

Preparing f

o

r

Measurement

5.

Press the [1] key.

Chicken

0

All the measurement data of the selected tag is
cleared.
Press the [ESC] key repeatedly to return to the Home
screen.

-End of procedure-

5.4

Deleting the tag

This section explains the procedure used to
delete the tag from the main unit.

Note

Before deleting the tag, save the mea-
surement data associated with the tag
to a personal computer, etc.
Once the tag has been deleted, all the
measurement data associated with the
tag is completely lost.

See Also

For how to save the measurement data, refer to
Chapter 1, “Receiving the Data on the Personal
Computer” in the “Working with Measurement
Data” part.

Home screen

18:54:27

222

222

25.9

°

C

1.

Press the [FUNC], [1], and [4] keys, in
order.

The “Tag Del” screen appears on the LCD.

F14

Ta g D e l

2.

Press the [SET] key.

Burger

1 2

3.

Press the [

▼

] key repeatedly until the

tag to be deleted is displayed on the
screen.

Chicken

0

4.

Press the [SET] key.

The confirmation dialog box appears.

Delete?

Ye s 1 / N o 0

5.

Press the [1] key.

The selected tag and its associated measurement data
is deleted.
Press the [ESC] key repeatedly to return to the Home
screen.

-End of procedure-

Summary of Contents for TM20
















































































































Reviews:

No comments