manualshive.com logo in svg

YOKOGAWA TM20, User Manual, Page: 82 / 111

Share
Download
YOKOGAWA TM20 User Manual Download Page 82

73

IM 54011-E

73

73

Measuring

T

emperatures

The measurement accuracy of the non-contact thermo probe(Model name:900 03)
is not reliable below the decimal point.  Therefore, before making a temperature
measurement with the non-contact thermo probe, set this instrument so that it
does not display a fraction of a temperature in the screen of the main unit.  The
non-contact thermo probe, however, can be used with this instrument to measure
temperatures without performing the following setups, but, if this is done, the
accuracy of the decimal in the temperature measurement cannot be guaranteed.

■

Switching on/off the decimal

portion of the temperature display

Home screen

18:54:27

2 5 . 0

°

C

1.

Press the [FUNC], [9], and [3] keys, in
order.

The “Digit” screen appears on the LCD.

F93

D i g i t

2.

Press the [SET] key.

A screen for switching on/off the decimal portion of
the temperature display is displayed.

Digit

0 . 1

°

C

3.

Press the [

▼

] key.

The decimal portion of the display is turned off.

Digit

1

°

C

[TIP]

Each time the [

▼

] key is pressed, the decimal

portion of the temperature is toggled on/off.

4.

Press the [SET] key.

The decimal portion of the temperature is no longer
displayed.

F93

D i g i t

5.

Press the [ESC] key three times.

The time display screen (i.e. Home screen) is restored.

18:54:57

2 5

°

C

-End of procedure-

5

Measuring Temperatures with the Non-Contact Thermo Probe

5 Measuring Temperatures with the Radiation Temperature Probe

Summary of Contents for TM20
















































































































Reviews:

No comments