YOKOGAWA TM20 User Manual Download Page 64

Page: 64 / 111

IM 54011-E

5 Confirm, Modify, Clear, or Delete the Data with the Main Unit

Preparing f

Measurement

Confirm, Modify, Clear, or Delete the Data with the Main Unit

5.1

Confirming the number of
pieces of tag data

This section explains the procedure for con-
firming the number of pieces of tag data.

Home screen

18:54:27

222

25.9

Press the [FUNC], [1], and [1] keys, in
order.

The “Curr Tag” screen appears on the LCD.

F11

C u r r Ta g

Press the [SET] key.

Burger

1 2

Press the [

▼

] key repeatedly until the tag to

be confirmed is displayed on the screen.

The tag name and the measurement data recorded in
association with the tag is displayed.

Beef

Press the [ESC] key repeatedly to return to the Home
screen.

-End of procedure-

5.2

Modifying the tag name

This section explains the procedure for modi-
fying the tag name.

Home screen

18:54:27

222

25.9

Press the [FUNC], [1], and [2] keys, in
order.

The “TagChnge” screen appears on the LCD.

F12

TagChnge

Press the [SET] key.

Burger

1 2

Press the [

▼

] key repeatedly until the

tag to be modified is displayed on the
screen.

Beef

Use the [CH] key to select the input
channel.

The channel indication below “INPUT” changes ac-
cordingly.

Summary of Contents for TM20
















































































































Search results

Summary of Contents for TM20

Reviews:

YOKOGAWA TM20, User Manual, Page: 64 / 111

Search results

Summary of Contents for TM20

Reviews: