YOKOGAWA TM20 User Manual Download Page 68

Page: 68 / 111

IM 54011-E

5 Confirm, Modify, Clear, or Delete the Data with the Main Unit

Preparing f

Measurement

Press the [FUNC], [2], and [2] keys, in
order.

The “LogChnge” screen appears on the LCD.

F22

LogChnge

Press the [SET] key.

A screen for selecting a log is displayed.

Convey

1 2

Press the [

▼

] key repeatedly until the

log to be modified is displayed on the
screen.

Accept

Use the [CH] key to select the input
channel.

The input channel of the [INPUT] gage is modified.

Press the [SET] key.

A screen for modifying the log name is displayed.

Accept

Enter a new log name to be modified.

Carry

[TIP]

• A log name can consist of a maximum of

eight alphanumeric characters.

• A tag name that has not been modified is

displayed on the screen. If it needs to be
modified, overwrite it with a new tag name.

See Also

For how to enter letters and numbers, refer to
Chapter 6, “How to Input Characters” in the
“Before Use” part.

Press the [SET] key.

A screen for modifying the measurement interval
appears.

I n t e r v a l

0 0 : 0 0 : 1 0

Enter the hours, minutes, and seconds.

I n t e r v a l

0 0 : 0 0 : 3 0

[TIP]

The definition and range of each input value is
given below.

00:00:00

Indicates the seconds.
The input range is between 0
and 59 seconds
Indicates the minutes.
The input range is between 0
and 59 minutes
Indicates the hours.
The input range is between 0
and 24 hours.

Summary of Contents for TM20
















































































































Search results

Summary of Contents for TM20

Reviews:

YOKOGAWA TM20, User Manual, Page: 68 / 111

Search results

Summary of Contents for TM20

Reviews: