80
80
IM 54011-E
7
Other Useful Functions
7 Other Useful Functions
■
To instantly confirm or clear the measured data on the main unit
There is a function on the main unit to clear the recorded measurement data.
If the measured data recorded in the main unit is not required anymore or if it needs to be
cleared instantly, use this function.
1.
Bring up the Home screen.
2.
Press the [
▼
] key repeatedly until the tag to be deleted is displayed.
3.
Use either the [<] or [>] key to select the measured data to be deleted.
[TIP]
Press the [<] key once to bring the last piece of measured data recorded for the tag up on the screen.
The measured data is displayed.
4.
Press the [FUNC] key.
The confirmation screen appears.
5.
Press the [1] key.
The measured data is cleared.
[TIP]
If the [FUNC] key is pressed while the tag name display screen is active, all the data associated with
the currently selected tag is cleared (this function can also be applied to logs).
-End of procedure-
■
To start a measurement in the logging mode at a specified time
(timer function)
The main unit has a function (timer function) to start logging measurement at a specified
time. This is useful to, for example, start logging measurements after one hour.
[TIP]
If the selected log has measurement data remaining in it, this timer function cannot be used. If this is
the case, either clear the measured data from the log or select another log.
See Also
For how to clear the measured data in a log, refer to Section 5.7, “Clearing the measurement data
associated with the log” in the “Preparing for Measurement” part.
1.
Bring up the Home screen.
2.
Press the [FUNC], [2], and [5] keys, in order.
The “Timer reserve” screen appears.
3.
Press the [SET] key.
4.
Press the [
▼
] key repeatedly until the log to record temperatures are displayed.
5.
Press the [SET] key.
The measurement interval set for the selected log is displayed.