IM 701210-07E
51
ZOOM (SEARCH)
Select the search type
Section 11.4
Select edge search in which search is performed
on the number of times the waveform goes
above a specified level (rising) or the number of
times the waveform goes below a specified
level (falling) from the search start point.
Edge search condition
Set the search source waveform, search start
point, level, search count, etc.
Zoom rate
Set the zoom rate (T/div) of the Z1 and Z2
zoom displays.
Zoom position
Set the zoom position by specifying the zoom
center position (center of the zoom box) in the
range –5 to +5 divisions with the center of the
waveform display frame set to 0 divisions.
Display of past search results
Specify the number of the search result to be
displayed.
Execute the search
Edge Search
Example when the edge is set to rising and the count is
set to 2
Note
• The following figure shows the menu that appears when the search type is set to Edge.
Select the search type
Section 11.4
Select auto scroll in which search is performed
by automatically moving the zoom position in
the specified direction.
Select the scroll direction
Select the scroll direction, left or right.
Zoom rate
Set the zoom rate (T/div) of the Z1 and Z2
zoom displays.
Zoom position
Set the zoom position by specifying the zoom
center position (center of the zoom box) in the
range –5 to +5 divisions with the center of the
waveform display frame set to 0 divisions.
Scroll speed
Select from 10 speed levels from 1 to 10.
Execute the search
• The following figure shows the menu that appears when the search type is set to Auto Scroll.
+
Level
Expanded display of
the searched section
Search start point
Detection position
Hysteresis
Summary of Contents for ScopeCorder DL750P
Page 1: ...ScopeCorder IM 701210 07E 3rd Edition...
Page 60: ...IM 701210 07E 59 MEMO...
Page 61: ...IM 701210 07E 60 MEMO...
