IM 701210-07E
20
Lower the Vertical Position for Viewing the Entire Waveform Amplitude
Section 5.4, “Setting the Vertical Position of Waveforms” in the User’s Manual Part 1
2
Turn the
jog shuttle
counterclockwise to
set Position to
-2.50 div
.
1
Press the
CH 1
key.
Since the vertical position was lowered, the entire amplitude
of the waveform is displayed on the screen.
The ground level
mark also moves.
Change the Time Axis Setting from 200
µ
s/div to 100 ms/div
Section 5.2, “Setting T/div” in the User’s Manual Part 1
Time axis setting refers to setting of the time per division of the grid.
If the time axis setting is increased, the screen display changes from update mode in which the displayed waveforms are updated using
triggers to roll mode in which the waveforms rolls from right to left on the screen.
Roll mode display is useful when observing signals with a long period or signals with slow changes.
1
Turn the
TIME/DIV
knob counterclockwise and set the time axis to
100 ms/div
.
Time axis setting of CH1
Roll mode display
Operating the DL750/DL750P
Summary of Contents for ScopeCorder DL750P
Page 1: ...ScopeCorder IM 701210 07E 3rd Edition...
Page 60: ...IM 701210 07E 59 MEMO...
Page 61: ...IM 701210 07E 60 MEMO...
