IM 701210-07E
19
Changing the Waveform Display Conditions
This section explains the operations used to divide the screen into windows and change settings such as the voltage sensitivity and
vertical position (vertical axis) and the time axis (horizontal axis).
Set the Number of Windows to Single
Section 8.1, “Changing the Display Format” in the User’s Manual Part 1
By default, the screen is divided into 4 windows (Quad). Since only CH1 is observed in this case, the display format is set to Single.
2
Display the selection menu and select
Single
.
1
Press the
DISPLAY
key.
Change the Voltage Sensitivity from 0.5 V/div to 0.2 V/div
Section 5.3, “Setting V/div” in the User’s Manual Part 1
1
Turn the
V/DIV
knob clockwise and set the voltage sensitivity to
0.2 V/div
.
Since the voltage sensitivity is increased, a section of the waveform goes off the display.
Set the voltage sensitivity of CH1
Summary of Contents for ScopeCorder DL750P
Page 1: ...ScopeCorder IM 701210 07E 3rd Edition...
Page 60: ...IM 701210 07E 59 MEMO...
Page 61: ...IM 701210 07E 60 MEMO...
