IM 701210-07E
52
Setup Menu Items
ZOOM (SEARCH)
Select the search type
Section 11.4
Select voice search in which search is
performed on the start section of the voice
memo recording (rising edge of the voice bit
of the event waveform).
Play the voice memo that is found
Set the search source waveform, search start
point, level, search count, etc.
Zoom rate
Set the zoom rate (T/div) of the Z1 and Z2
zoom displays.
Zoom position
Set the zoom position by specifying the zoom
center position (center of the zoom box) in the
range –5 to +5 divisions with the center of the
waveform display frame set to 0 divisions.
Display of past search results
Specify the number of the search result to be
displayed.
Execute the search
Playing the Voice Memo That Is Found
When using the voice search function, the voice memo
that has been found can be played by pressing the Play
Start soft key. The voice memo can be played only
when the searched item is the newest waveform that has
been acquired to the acquisition memory. While the
voice memo is being played, Play Start indication
changes to Play Stop. To stop the voice memo that is
playing, press the Play Stop soft key. When the voice
memo is finished playing, the Play Stop indication
automatically changes to Play Start even if the Play Stop
soft key is not pressed.
Note
• The following figure shows the menu that appears when the search type is set to Voice.
+
Summary of Contents for ScopeCorder DL750P
Page 1: ...ScopeCorder IM 701210 07E 3rd Edition...
Page 60: ...IM 701210 07E 59 MEMO...
Page 61: ...IM 701210 07E 60 MEMO...
