IM 701210-07E
41
DUAL CAPTURE
+
Turn ON/OFF dual capture
Section 7.6
Time/div of the sub waveform
Specify the acquisition waveform
number
Specify the number of the sub waveform you
wish to display.
Sub waveform display frame size and
display position
Select the display frame size of sub waveforms
and the display position of the 1/4-sized
display frame.
Expand/reduce the sub waveform along
the time axis
Expand/reduce the sub waveform along the
time axis.
Time axis position of the sub waveform
Move the sub waveform along the time axis.
Turn ON/OFF the event waveform
display
The times when triggers are activated can be
displayed as event waveforms. The event
waveform display can be turned ON/OFF.
Conditions That Allow Dual Capture
Dual capture is possible when all of the following
conditions are met.
• Time/div of the main waveform
100 ms/div to 3 day/div (roll mode display)
• Sample rate of the main waveform: 100 kS/s or less
• (Sample rate of the main waveform) > (Sample rate
of the sub waveform)
• Trigger mode is set to Auto or Log
Note
DUAL
CAPTURE
RECORDER
Display format of sub waveforms
Set the display format of sub waveforms.
Select Main (same as the main window),
Single (no division), Dual (two divisions),
Trial (three divisions), Quad (four divisions),
Octal (eight divisions), or Hexadecimal (16
divisions).
Select the displayed waveform
Select the waveform to be displayed on the
sub waveform window.
List the sub waveforms
Displays a list of sub waveforms. The list can
be displayed by selecting waveforms.
Send mail
Sends an e-mail when a sub waveform is
acquired.
SHIFT
DAUL
CAPTURE
DL750P
DL750
Summary of Contents for ScopeCorder DL750P
Page 1: ...ScopeCorder IM 701210 07E 3rd Edition...
Page 60: ...IM 701210 07E 59 MEMO...
Page 61: ...IM 701210 07E 60 MEMO...
