YOKOGAWA ScopeCorder DL750P, Operation Manual, Page: 10 / 61

IM 701210-07E
9
Operations Using a USB Mouse
Section 4.2, “Entering Values and Strings” in the User’s Manual Part 1
By connecting a USB mouse to the USB PERIPHERAL connector on the side panel, you can use the mouse to perform the same
operations as you would using the front panel keys of the DL750/DL750P.
USB mouse
(with a wheel)
DL750/
DL750P
TRIGGER
VERTICAL
HORIZONTAL
USB PERIPHERAL connector
Top menu
Right-click on the screen (waveform display area) to display the names
of the front panel keys as a top menu.
Pointer
Move the pointer to the item you wish to
select and left-click. The setup menu
corresponding to the selected item appears.
Sub menu
For items lower in the hierarchy than the top menu, a sub menu is displayed.
Moving the pointer to this position
causes the pointer’s appearance to
change from to . In this
condition, turn the wheel to change
the T/div setting.
Moving the pointer to this position
causes the pointer’s appearance to change
from to . In this condition, turn the
wheel to change the V/div setting.
Basic Jog Shuttle Operation
Selecting Items Setting Values
Jog shuttle
Select items below the currently-
selected item.
Selects items above the currently-
selected item.
Resets the value to the initial value.
Arrow keys
Move the cursor left or right.
Jog shuttle
Shuttle ring
Varies the amount of change depending on the rotation angle.
Increases (speeds up) the value.
Decreases (slows down) the
value.
Tip