IM 701210-07E
43
Waveform display format
Section 8.6
Select from T-Y&X-Y (both normal waveforms
and X-Y waveforms), X-Y (only X-Y
waveforms), and T-Y (only T-Y waveforms).
X-axis mode
Select Single in which the X axis is set to a
common trace, and the Y axis displays all the
waveforms whose display are turned ON or
Quad in which the X axis trace and Y axis trace
are set individually for XY1 to XY4.
Number of data points used to display
waveforms
Select the number of dots when interpolation is
OFF from 2 k points or 100 k points.
Select the XY axis
Select the axis to be set from XY1 to XY4.
Select the X-axis channel
Select the channel to be assigned to the X-axis.
Select the Y-axis channel
Select the channel to be assigned to the Y-axis.
X-Y waveform display range
Set the X-Y waveform display range using the
Y-axis range (–5 to +5 div) of the T-Y
waveform display.
Notes When Displaying X-Y Waveforms
• The divided windows of the T-Y waveform display
when using the T-Y & X-Y mode are displayed
according to Format in the DISPLAY menu.
• The zoom function applies only to T-Y waveforms. In
addition, Main, Z1, or Z2 can be selected for the T-Y
waveform.
• To expand the X-Y waveform, change Upper and
Lower settings or V Zoom of each channel. The
displayed waveform can be enlarged/reduced.
• To change the display position of the X-Y waveform,
change the position of each channel. (For voltage
input)
• X-Y waveform is not displayed when the horizontal
axis of a waveform trace is in units of time and the
horizontal axis of another waveform trace is in units of
frequency.
• Logic waveforms and event waveforms are not
applicable to X-Y waveform display.
• When using the dual capture function, X-Y display
and T-Y&X-Y display are not possible.
Note
+
• The following figure shows the menu that appears when the waveform display format is set to T-Y&X-Y.
Summary of Contents for ScopeCorder DL750P
Page 1: ...ScopeCorder IM 701210 07E 3rd Edition...
Page 60: ...IM 701210 07E 59 MEMO...
Page 61: ...IM 701210 07E 60 MEMO...
