IM 701210-07E
18
Displaying Waveforms on the Screen
This section explains the operations of setup initialization and auto setup that are useful when displaying typical repetitive waveforms
such as sine and rectangular waves.
Initialize Settings
Section 4.4, “Initializing Settings” in the User’s Manual Part 1
The settings made using the front panel keys are reset to factory default. This operation is not necessary if you are using the DL750/
DL750P for the first time after purchase. However, we recommend that you try the operation for future reference. This initialization
operation is useful when you wish to redo the settings from scratch according to the input signal.
2
Press
Initialize.
1
Press the
SETUP
key.
To set the DL750/DL750P back to the condition that
existed immediately before the initialization, press here.
• When initialization is executed, all the channels with
modules installed are displayed, and the
DL750/DL750P enters the START condition.
• The items that cannot be initialized using the Initialize
soft key are as follows:
Date/time settings, language settings, communication
settings, and SCSI ID setting
To initialize all settings except the date/time, carry out
the following procedure.
[Turn ON the power switch while holding down the
RESET key]
Note
Perform Auto Setup
Section 4.5, “Performing Auto Setup” in the User’s Manual Part 1
Voltage axis, time axis, trigger, and other settings are automatically configured according to the input signal. This is useful when you
wish to quickly display the waveform or when you do not know the setup conditions because the characteristics of the input signal are
unknown.
1
Press the
SETUP
key.
To return the DL750/DL750P back to the condition
that existed immediately before auto setup, press here.
2
Press
Auto Setup
.
CH1 input signal
• When auto setup is executed, only the waveforms of the
channels in which signals are being applied are displayed.
• Modules that can be automatically setup
701250 (HS10M12), 701251 (HS1M16), 701255
(NONISO_10M12), 701260 (HV (with RMS)), 701261
(UNIVERSAL), 701262 (UNIVERSAL (AAF)), and
701275 (ACCL/VOLT)
• Applicable waveforms for auto setup
Frequency: Approx. 50 Hz to 1 MHz
Type: Uncomplicated repetitive waveforms
Note
Operating the DL750/DL750P
Summary of Contents for ScopeCorder DL750P
Page 1: ...ScopeCorder IM 701210 07E 3rd Edition...
Page 60: ...IM 701210 07E 59 MEMO...
Page 61: ...IM 701210 07E 60 MEMO...
